Casio KL-60 User's Manual. Best price available! Buy Casio KL60 label tapes for your Electronic Labelmaker today! Need Support? If you download the manual and still have questions, you can reach Dymo Support at 877-724-8324. Batteries. Misuse of batteries can cause them to leak acid that can cause damage to nearby items and creates the possibility of personal injury. Be sure that the plus (+) and minus (–) sides of each battery are facing correctly. Introduction Congratulations on your selection of the CASIO KL-60 Label Printer.
- Casio Ez Label Printer Error
- Casio Ez Label Printer Manual
- How To Use Casio Ez-label Printer Kl-60
- Casio Ez Label Printer Kl-60 Manual
- Casio Label It Manual
E-5
Part 2
Getting Ready
This part of the manual tells you how to load batteries and the tape cartridge,
and how to perform other basic setups for the Label Printer.
Important!
•
Be sure to read this section before attempting to use the Label Printer.
Power Supply
The Label Printer can be powered by six AA-size alkaline batteries.
Replacing Batteries
A handy low battery power indicator lets you know when battery power is get-
ting too low for proper operation. The message “BATT” appears on the display
if battery power is low when you perform any of the following operations.
•
Turn power on
•
Execute a print operation
Whenever the “BATT” message appears, press SET to clear it from the display.
You should still be able to perform some Label Printer operations, but some
power intensive operations (like printing) may become impossible if battery power
is too low. In any case, you should replace batteries as soon as possible after
the “BATT” message appears.
Important!
•
All data stored in memory is deleted whenever batteries go dead and when
you replace batteries. Be sure to keep written backup copies of all important
data (text and documents).
•
Batteries can burst or leak and damage your unit if you do not use them
correctly. Note the following important points.
•
Be sure that the plus (+) and minus (–) sides of each battery are facing cor-
rectly.
•
Never mix batteries of different types
•
Never leave dead batteries in the Label Printer.
•
Remove the batteries if you do not plan to use the Label Printer for a long
time.
•
Replace the batteries in accordance with the battery life marked on the side
of the battery.
Warning!
•
Never use recharged batteries with the unit.
•
Do not expose batteries to direct heat, do not short circuit them, and do not
try to take them apart.
•
Keep batteries out of the reach of small children. If swallowed, consult
with a physician immediately.
•
Be sure to replace the batteries in accordance with the battery life printed on
the side of the battery itself.
To load the batteries
Caution
•
Do not touch the springs inside the battery
compartment cover with your fingers while
loading or replacing batteries. The springs
have sharp areas and can cut your fingers.
1. Turn power off.
2. Turn over the label printer. While pressing
down on the back cover lock remove the
back cover as shown in the illustration.
3. Load batteries into the battery compartment.
•
Be sure to use alkaline batteries.
Casio Ez Label Printer Error
•
Make sure the positive (+) and negative (–)
ends of the batteries are facing correctly when
you load them.
4. Replace the back cover.
•
Make sure the back cover is positioned as
shown in the illustration when replacing it.
Trying to force the cover into place while it is
in the wrong position can cause damage to
the cover or label printer.
•
Make sure that the tape cartridge is securely
in place and that the back cover is closed se-
curely before using the label printer. A loose
tape cartridge can cause print quality problems.
E-4
Part 1
Getting Acquainted
This part of the manual provides you with important information you need to
know in order to use the Label Printer to its full potential. Be sure to read it
carefully before using the Label Printer for the first time.
Important Precautions
•
Keep your Label Printer out of areas subject to temperature extremes, mois-
ture and direct sunlight. The recommended temperature range is 10° to 35°C
(50° to 95°F).
•
Don’t let coffee, juice or other liquids splash onto the Label Printer.
•
Never let paper clips, pins or other foreign objects get into the tape outlet slot
or printer of the Label Printer.
•
Do not pile heavy objects on top of the Label Printer.
•
Never try to take the Label Printer apart or attempt your own maintenance.
•
Do not drop your Label Printer and avoid strong impact.
•
Casio Ez Label Printer Manual
Do not pull on the tape or try to force it back into the Label Printer.
•
Do not use benzine, thinner, or other volatile chemicals to clean the exterior
of the Label Printer. Use a soft, dry cloth or a cloth dampened in a weak
solution of a mild, neutral detergent and water. Wring the cloth out until all
excess moisture is removed.
•
A dirty printer head can cause printing to become smudged. When this hap-
pens, clean off the printer head by wiping it with a cotton swab moistened
with alcohol (page E-14).
•
Use of the Label Printer next to a television or radio may interfere with recep-
tion.
General Guide
Label Printer Menus
Label Printer operation is designed to be as simple as possible, thanks to on-
screen menus that you can use to select the settings you need. Each menu is
described in detail in the sections that follow in this manual, but note the follow-
ing general points when using them.
•
The item that is underlined in a menu is the one that is currently selected.
.: ;
,
•
Use
H
and
J
to move the underlining left and right and change the selected
item.
•
Press SET to execute the underlined item, or ESC to exit the displayed menu
(and return to the previous menu or screen) without selecting anything.
•
When you press SET to execute a menu item, the Label Printer either moves
on to the next menu, or it executes the selected function and returns to the
text input screen that you started from.
5
1
2
3
4
6
1
Power ON/OFF Key
Turn power on and off.
2
How To Use Casio Ez-label Printer Kl-60
Function key
3
Letter keys
4
Tape cutter button
5
Liquid crystal display (LCD)
6
Tape outlet
Casio Ez Label Printer Kl-60 Manual
Currently selected item