Press The Push Bar To Activate Control See User Manual

Advertising

View and Download Chamberlain 41A7305-1 instruction manual online. SMART CONTROL PANEL. 41A7305-1 Control Panel pdf manual download. Push buttons or remote control transmitters. Activate door ONLY when it can be seen clearly, is properly. (TTC) LOCK Press the push bar to open or close the door. Page 4 ONE YEAR LIMITED WARRANTY The. To activate the SET function, press F3 or click the F3 menu option at the top of the main menu screen. SET allows an Administrator or User to set up a unique working environment profile. The stored profile activates each time a corresponding user logs into the system. To activate a submenu option, move the highlight bar to the option, and S S.

To Open the Door Manually

The door should be fully
closed if possible. Pull down
on the emergency release
handle and lift the door
manually. To reconnect the
door to the opener, press the
door control push bar.

Liftmaster Press The Push Bar To Activate Control See User Manual

The lockout feature prevents
the trolley from reconnecting
automatically. Pull the
emergency release handle
down and back (toward the
opener). The door can then
be raised and lowered
manually as often as
necessary. To disengage the
lockout feature, pull the
handle straight down. The
trolley will reconnect on the
next UP or DOWN operation,
either manually or by using
the door control or remote.

To prevent possible SERIOUS INJURY or DEATH from a
falling garage door:

• If possible, use emergency release handle to

Press The Push Bar To Activate Control See User Manual Chamberlain

disengage trolley ONLY when garage door is CLOSED.
Weak or broken springs or unbalanced door could
result in an open door falling rapidly and/or
unexpectedly.

• NEVER use emergency release handle unless garage

doorway is clear of persons and obstructions.

• NEVER use handle to pull door open or closed. If

rope knot becomes untied, you could fall.

Trolley
Release
Arm

NOTIC

E

Emergency
Release
Handle
(Pull Down)

Trolley
Release
Arm

NOTICE

Emergency
Release Handle
(Down and Back)

WARNING

CAUTION

WARNING

WARNING

LOCKOUT POSITION

MANUAL DISCONNECT

POSITION

27

Using the Wall-Mounted
Door Control

THE MULTI-FUNCTION DOOR CONTROL
Press the push bar to open or close
the door. Press again to reverse the
door during the closing cycle or to
stop the door while it's opening.

Light feature

Press the Light button to turn the
opener light on or off. It will not control the opener
lights when the door is in motion. If you turn it on and
then activate the opener, the light will remain on for
4-1/2 minutes. Press again to turn it off sooner. The
4-1/2 minute interval can be changed to 1-1/2, 2-1/2,
or 3-1/2 minutes as follows: Press and hold the Lock
button until the light blinks (about 10 seconds). A
single blink indicates that the timer is reset to 1-1/2
minutes. Repeat the procedure and the light will blink
twice, resetting the timer to 2-1/2 minutes. Repeat
again for a 3-1/2 minute interval, etc., up to a
maximum of four blinks and 4-1/2 minutes.

Lock feature

Designed to prevent operation of the door from
hand-held remote controls. However, the door will
open and close from the Door Control, the Outside
Keylock and the Keyless Entry Accessories.
To activate, press and hold the Lock button for 2
seconds. The push bar light will flash as long as the
Lock feature is on.
To turn off, press and hold the Lock button again for
2 seconds.The push bar light will stop flashing. The
Lock feature will also turn off whenever the “Learn”
button on the motor unit panel is activated.

Bar

Additional features when used with the
3-Channel hand-held remote

A) To control the opener lights:

In addition to operating the door, you
may program the remote to operate the lights.
1. With the door closed, press and hold a small

remote button that you want to control the light.

2. Press and hold the Light button on the

Multi-Function door control.

3. While holding the Light button, press and hold the

Lock button on the door control.

4. After the opener lights flash, release all buttons.

LOCK

LIGHT

Push
Button

Lock
Button

Light
Button

B) To operate one door using all three buttons on the

hand-held remote:

You may program the remote to
open the door with the large
button, close it with the middle
button, and stop the door’s movement with
the third button.

NOTE: If remote is already programmed, you must
first erase all codes. See Programming.

1. With the door closed, press and hold the large

remote push button.

2. Press and hold the Lock button on the door

control.

3. Press and hold the door control push bar.
4. After the opener lights flash, release all buttons.

Open

Close

Stop

Advertising
This manual is related to the following products:
Popular Brands
Popular manuals

Comments are closed.